Table of Contents
Advertisement
InTroduCTIon
1.2. Intended application
The motor is primarily intended to be used for heavy electrical vehicle applications, as a traction motor,
generator or auxiliary motor. It also fits as propulsion or auxiliary unit in Marine segment. Due to the
nature of their electrical and mechanical operating conditions, improper installation or operation, as well
as insufficient maintenance, could introduce hazards which could lead to severe bodily injuries or
damages to property.
These instructions only consider those measures which must be observed when the motor is being
operated in its operative range and in its intended application. The applicable national, local and plant
regulations must also be taken into consideration.
1.3. Warranty
The warranty period is 12 months after commissioning but no later than 18 months from the date of
notification of being ready for shipment. An extended warranty can be offered on request.
1.4. Information on electromagnetic compatibility
The user must take precautions during installation and operation in order not to impair the
electromagnetic compatibility.
If it is necessary to replace any anti-interference components, filters or screened cables, the new parts
must be identical to the originals.
1.5. Required qualifications for personnel who
handle the motor
Installation, operation, maintenance and repair work may only be carried out by mechanically and
electrically skilled personnel qualified and properly trained for this work. These persons must be well
informed about the motor, that is, they must have completely read and fully understand the relevant
chapters of these operating instructions.
5
Advertisement
Table of Contents
