Wireless Lan Profiles (On Phone Screen) - Cisco 6861 Deployment Manual

Multiplatform phones wireless lan
Hide thumbs Also See for 6861:
Table of Contents

Advertisement

If PSK is selected to utilize Pre-Shared Key authentication, then a PSK Passphrase must be entered. The PSK
Passphrase must be 8-63 ASCII character string.
If WEP is selected to utilize static WEP (Wired Equivalent Privacy) authentication, then a WEP Key must be
entered.
Only WEP key 1 is supported. The entered key must match the transmit key on the access point side. The WEP
Key must be in one of the following formats:
▪ 40/64 Bit Key = 5 digits ASCII or 10 digits HEX character string
▪ 104/128 Bit Key = 13 digits ASCII or 26 digits HEX character string
If None is selected, then no authentication is required and no encryption will be utilized.
If Auto is selected, your phone dynamically chooses EAP-FAST, PEAP-MSCHAPv2, or PEAP-GTC as
authentication method based on communication with the target AP.
Frequency Band supports 5G, 2.4G, and Auto. Select the desired Frequency Band option:
Auto = Gives preference to 5 GHz channels, but operates on both 5 GHz and 2.4 GHz channels
2.4 GHz = Operates on 2.4 GHz channels only
5 GHz = Operates on 5 GHz channels only
Once the phone connects to the target AP, the connection info would be displayed on phone's web portal as the following
picture shows. Click the Info > Status to view the connection information.
Notes:
Any change to the currently connected Wi-Fi profile would cause the phone to disconnect with the current
AP, warm reboot, then connect to current AP with the changed parameters.
If you have a wired network deployed on your site, connect your phone to the wired network first. After
configuring Wi-Fi profiles on the phone web page, you can force the phone to connect to the configured
profile by disconnecting the wired network.
All the Wi-Fi profiles are saved on the phone. The phone can recover the previous Wi-Fi connection after a
power cycle.

Wireless LAN Profiles (on Phone Screen)

To configure the Wi-Fi profiles on the phone screen, navigate to Network configuration > Wi-Fi configuration > Wi-Fi
profile.
22
Cisco IP Phone 6861 Multiplatform Phones Wireless LAN Deployment Guide

Advertisement

Table of Contents
loading

Table of Contents