Advanced Settings - Cisco 6861 Deployment Manual

Advanced Settings

TKIP Countermeasure Holdoff Time
TKIP countermeasure mode can occur if the access point receives two Message Integrity Check (MIC) errors within
60 seconds. When this occurs, the access point will de-authenticate all TKIP clients associated to that 802.11 radio and
hold off any clients for the countermeasure holdoff time (default = 60 seconds).
To change the TKIP countermeasure holdoff time on the Cisco Autonomous Access Point, telnet or SSH to the access
point and enter the following command specifying the number of seconds and WLAN ID.
Interface dot11radio X
countermeasure tkip hold-time <nseconds>
20
Cisco IP Phone 6861 Multiplatform Phones Wireless LAN Deployment Guide