Issue 3.01
___________________________________________________________________________________
6.
Default
Ports
7.
___________________________________________________________________________________
B - 8
When the MultiAssign icon is pressed from Stations/Config/InMail the following
screen will be presented. Note the default ports for InMail is 1-128. All other
assignments are the similar to extension numbering.
Figure B-7 MultiAssign - InMail Station Mailbox Options
When a user is not in the Standards Tab they will be able to use range
programming by clicking on the MutliAssign tab on the toolbar in PCPro. Below
is an example of where this is on the "Home" toolbar. Select the drop down
arrow and you will see Account codes, DID and Extension number.
Figure B-8 MultiAssign Tab
NEC SL1100