Hardware Configuration In Hw Config - Siemens SENTRON VL Series System Manual

Data transfer to the PLC
7.1 Interface to S7-300 and control/diagnosis via PROFIBUS
7.1.2

Hardware configuration in HW Config

Step 1 Starting HW Config
Start HW Config by double-clicking on "Hardware" in the generated project structure under
"Project Name > Station Name"
In the example, "S7_Pro2 > SIMATIC 300-Station"
146
3WL/3VL circuit breakers with communication capability - PROFIBUS
System Manual, 03/2011, A5E01051353-02