Data Formats 307 To 373 - Siemens SENTRON VL Series System Manual

Data library
8.7 Formats
Table 8- 64
The table below shows the format (146) "Direction of rotation of phase". The normal status of
the direction of rotation of the phase can be set using this.
Table 8- 65
The table below shows the format (162) "Voltage transformer". The setting of the primary
connection also influences the location of the measured voltage variables.
Table 8- 66
8.7.6

Data formats 307 to 373

The table below shows the format (307) "Tripping of the metering function" that displays the
content of the last tripping operation by the extended protection function.
Table 8- 67
The table below shows the format (308) "Threshold alarms" that displays the currently
pending threshold alarms.
270
Format (145) "Direction of incoming supply"
Byte Value
0 0
0 1
Format (146) "Direction of rotation of phase"
Byte Value
0 0
0 1
Format (162) "Voltage transformer"
Byte Value
0 0
0 1
Format (307) "Tripping of the metering function"
Byte Value
0/1 0x0000
0/1 0x0001
0/1 0x0002
0/1 0x0004
0/1 0x0008
0/1 0x0040
0/1 0x0080
0/1 0x0100
0/1 0x0200
0/1 0x0400
0/1 0x0800
0/1 0x1000
From top to bottom
From bottom to top
Right (e.g. L1 – L2 – L3)
Left (e.g. L1 – L3 – L2 or similar)
The voltage transformer is delta-connected on the primary side.
The voltage transformer is star-connected on the primary side.
No tripping operation
Phase unbalance current
Phase unbalance voltage
Active power in normal direction
Active power in reverse direction
Undervoltage
Overfrequency
Underfrequency
THD voltage
Change of phase rotation
3WL/3VL circuit breakers with communication capability - PROFIBUS
Meaning
Meaning
Meaning
Meaning
Overvoltage
THD current
System Manual, 03/2011, A5E01051353-02