Siemens SENTRON VL Series System Manual page 202

Data library
8.6 Data sets
Byte
221 Property byte for byte 60 (event log of the last
10 events with time)
222 Property byte for byte 180 (status of the
connected PROFIBUS)
223 Property byte for byte 181 (controls the
commands/functions (e.g. delete/reset
min./max. values) of the communication
module)
224 Property byte for byte 182 (controls the
outputs of the communication module (e.g.
switching the breaker))
225 Property byte for byte 183
(shows the phase with maximum load)
226 Property byte for byte 184
(mean value of the power factor)
227 Property byte for byte 186 (current of the
phase with maximum load)
228 Property byte for byte 188 (time until
presumed overload trip)
229 Property byte for byte 190
(current in neutral conductor)
230 Property byte for byte 192
(current that flows to ground)
231 Property byte for byte 194 (system time of the
circuit breaker)
232 Property byte for byte 202 (position of the
circuit breaker in the frame)
233 Property byte for byte 203 (status of the circuit
breaker (on/off/charged, etc.))
234 Property byte for byte 204 (overload
parameter I parameter set A)
R
235 Property byte for byte 206 (overload
parameter I parameter set B)
R
236 Property byte for byte 208
(rating plug)
237 Property byte for byte 210
(active parameter set)
202
Description Data Source Source
point WL VL
— COM15 COM20
— COM15 COM20
— COM15 COM20
— COM15 COM20
— ETU ETU
— Meter. fct. —
— ETU ETU
— ETU —
— ETU ETU
— ETU ETU
— COM15 COM20
— COM15 COM20
— BSS COM20
— ETU ETU
— ETU —
— ETU ETU
— ETU —
3WL/3VL circuit breakers with communication capability - PROFIBUS
System Manual, 03/2011, A5E01051353-02
Format Length Scaling
(bits)
PB 8 —
PB 8 —
PB 8 —
PB 8 —
PB 8 —
PB 8 —
PB 8 —
PB 8 —
PB 8 —
PB 8 —
PB 8 —
PB 8 —
PB 8 —
PB 8 —
PB 8 —
PB 8 —
PB 8 —