Siemens SENTRON VL Series System Manual page 180

Data library
8.5 Function classes
Description
Switch position at the digital input
module 2
Switch position at the digital output
module 1
Switch position at the digital output
module 2
Shows the phase with maximum load
Position and status of the circuit
breaker in the frame
Modules connected to the
CubicleBUS
Status of the inputs of the digital input
module 1
Status of the inputs of the digital input
module 2
Status of outputs of the digital output
module 1
Status of outputs of the digital output
module 2
Status of the connected PROFIBUS
Status of the circuit breaker
(on/off/powered, etc.)
Maintenance information about the
main contacts
* COM20 only
180
Data Source Source
point WL VL
115 DI2 —
119 DO1 —
124 DO2 —
373 ETU ETU
24 COM15 COM20
88 COM15 —
110 DI1 —
114 DI2 —
118 DO1 —
123 DO2 —
17 COM15 COM20
328 BSS COM20
405 ETU —
3WL/3VL circuit breakers with communication capability - PROFIBUS
Format Length
(bits)
Format 8
(111)
Format 8
(119)
Format 8
(119)
Format 3
(373)
Format (24) 4
Format (88) 32
Hex 8
Hex 8
Hex 8
Hex 8
Format (17) 3
Format 8
(328)
Format 2
(405)
System Manual, 03/2011, A5E01051353-02
Scaling Contained
in DS.Byte
— DS69.4
— DS69.5
— DS69.6
— DS51.183
DS52.24*
— DS51.202
DS92.37
DS52.25*
— DS92.20
DS91.48
— DS69.0
— DS69.1
— DS68.14
— DS68.15
— DS51.180
DS52.54*
— DS51.203
DS52.22*
DS92.40
— DS91.40