Chapter 2: Prerequisites - Labconco Protector XL 1124 Series User Manual

Original instructions
C
HAPTER
P
REREQUISITES
Before you install your floor-mount laboratory fume hood, you need to prepare
your site for installation. Carefully examine the location and floor where you
intend to install your floor-mounted hood. You must be certain that the area is
level and of solid construction. In addition, a dedicated source of electrical power
must be located near the installation site.
Carefully read this chapter to learn the requirements for your installation site:
 The location requirements.
 The support requirements.
 The exhaust requirements.
 The electrical power requirements.
 The service line requirements.
 The space requirements.
Refer to Appendix B: Protector XL Floor-Mounted Hood Dimensions for
complete fume hood dimensions.
Refer to Appendix C: Protector XL Floor-Mounted Hood Specifications for
complete laboratory fume hood electrical and environmental conditions,
specifications and requirements.
Product Service 1-800-522-7658
2
7