Unattended Baggage Detection - HIKVISION DS-2DF8A836IX-AEL User Manual

complete drawing.
Repeat the step to configure other regions. Up to 4 regions can be set. You can click the
button to clear all pre-defined regions.
7. Configure the parameters for each detection region separately.
 Sensitivity: The value of the sensitivity defines the size of the object which can trigger
the alarm. When the sensitivity is high, a very small object can trigger the alarm.

Detection Target: You can select Human, Vehicle, or Other as the detection target. If
Human is selected, only human beings will be identified as detection objects and as
well as Vehicle and Other.
8. Click
schedule configuration is the same as the settings of the arming schedule for motion
detection. Refer to Section 5.2.1 Configuring Motion Detection for more details.
9. Click
Notify Surveillance Center, Send Email, Upload to FTP, Trigger Channel, Smart Tracking,
White Light Flashing, Audible Warning, and Trigger Alarm Output are selectable.

For speed dome, you can also choose to link smart tracking. Smart Tracking should be
configured in advance.

For certain models, White Light Flashing and Audible Warning are supported. Refer to
Section 5.2.1 Configuring Motion Detection for detailed configuration.
10. Click

5.3.7 Unattended Baggage Detection

Purpose:
Unattended baggage detection function detects baggage which is left in a pre-defined virtual
region, and some certain actions can be taken when the alarm is triggered.
Steps:
1. Enter the Unattended Baggage Detection settings interface:
Configuration> Event > Smart Event> Unattended Baggage Detection
2. Check the checkbox of Enable to enable the Unattended Baggage Detection function.
© Hikvision
tab to enter the arming schedule setting interface. The time
tab to select the linkage method taken for the region exiting alarm,
button to save the settings.