Table of Contents
Advertisement
For certain models, White Light Flashing and Audible Warning are supported. Refer to
Section 5.2.1 Configuring Motion Detection for detailed configuration.
10. Click
5.3.6 Configuring Region Exiting Detection
Purpose:
Region exiting detection function detects people, vehicle or other objects which exit from a
pre-defined virtual region, and some certain actions can be taken when the alarm is triggered.
Steps:
1. Enter the Region Exiting Detection settings interface:
Configuration> Event > Smart Event> Region Exiting Detection
2. Check the checkbox of Enable to enable the Region Exiting Detection function.
3. The event triggered and park action related PTZ movement will be locked for 180 seconds
after you enter the line crossing detection interface. Optionally, you can click the
when the button turns to
4. Select the region from the dropdown list for detection settings.
5. Click the
6. Click on the live video to specify the four vertexes of the detection region, and right click to
© Hikvision
to save the settings.
Figure 5-26 Configuring Region Exiting Detection
button to manually activate the movement, or lock the movement
button to start the region drawing.
by clicking it.
Advertisement
Table of Contents
