Table of Contents
Advertisement
Click the zoom/iris/focus buttons to realize lens control.
The functions vary depending on different camera models.
5.2.1 Configuring Motion Detection
Purpose:
Motion detection is a feature which can trigger alarm actions and actions of recording videos
when the motion occurred in the video security region.
Steps:
1.
Enter the motion detection setting interface:
Configuration > Event > Basic Event > Motion Detection
2.
Check the checkbox of the Enable Motion Detection to enable this function.
You can check the Enable Motion Detection in PTZ Control checkbox and when the speed
dome is performing PTZ action, motion detection can also trigger alarm.
You can check the Enable Dynamic Analysis for Motion checkbox if you want the detected
object get marked with rectangle in the live view.
3.
Select the configuration mode as Normal or Expert and set the corresponding motion
detection parameters.
Normal
Steps:
© Hikvision
Figure 5-10 Motion Detection Settings-Normal
Advertisement
Table of Contents
