Maintenance - HIKVISION DS-2DF8A836IX-AEL User Manual

2. Set the RS-485 parameters and click
Note:
The Baud rate, PTZ Protocol and PTZ Address parameters of the camera should be exactly the
same as those of the control device.
VCA Resource
Purpose:
VCA Resource offers options to enable certain VCA functions and hide others. It helps allocate
more resources to the wanted functions. A reboot is required after setting the VCA Resource.
Steps:
1. Enter the VCA Resource interface:
Configuration> System > System Settings > VCA Resource
2. Select a desired VCA combination.
3. Click
effect.
Notes:

VCA Resource function varies according to different camera models.

VCA options are mutually exclusive.

The function may not be supported by some camera models.
About
Click View License, you can check Open Source Software Licenses.

6.3.2 Maintenance

Upgrade & Maintenance
 Rebooting the Camera
Steps:
3. Enter the Maintenance interface:
© Hikvision
Figure 6-51 RS-485 Settings
to save the settings. A reboot is needed for the settings to take
to save the settings.