Table of Contents
Advertisement
alarm, Notify surveillance center, send email, upload to FTP, trigger channel, smart tracking
and trigger alarm output are selectable. Refer to Section 5.2.1 Configuring Motion
Detection for more details.
10. Click
5.3.8 Object Removal Detection
Purpose:
Object removal detection function detects objects which remove in a pre-defined virtual region,
and some certain actions can be taken when the alarm is triggered.
Steps:
1.
Enter the Object Removal Detection settings interface:
Configuration> Event > Smart Event> Object Removal Detection
2.
Check the checkbox of Enable to enable the Object Removal Detection function.
3.
The event triggered and park action related PTZ movement will be locked for 180 seconds
after you enter the unattended baggage detection interface. Optionally, you can click the
© Hikvision
button to save the settings.
Figure 5-28 Configuring Object Removal Detection
button to manually activate the movement, or lock the movement
Advertisement
Table of Contents
