Manual Control; Embedded - Micromeritics Gemini VII 2390 Service Manual
Surface area analyzer
Hide thumbs
Also See for Gemini VII 2390:
- Installation instructions and checklist (113 pages) ,
- Installation instructions and checklist (80 pages)
Table of Contents
Advertisement
Gemini VII 2390 Service
Manual Control
Some components of the analyzer can be manually controlled using commands provided in the
software.
Embedded
An overlay is used when manually controlling the analyzer with a keypad. The overlay is
placed on the keypad to guide you through the functions.
RAW/TRUE
B/S
Feb 09
Displays the raw A/D readings for the sample, balance,
and Po transducers or quantity adsorbed transducer, or
the true pressure and volume readings.
Disables/enables the balance servo.
• A B in the display window indicates that the balance
servo and sample servo are enabled.
• An S indicates that only the sample servo is enabled;
the balance servo is disabled.
For this command, you must press the
pressing
.
8
Manual Control
key before
Alt
2-15
Advertisement
Table of Contents
Need help?
Do you have a question about the Gemini VII 2390 and is the answer not in the manual?