Table of Contents
Advertisement
WARNING
Risk of injury, damage to the ExitSafe and
damage to the area surrounding the ExitSafe as
a result of improper electrical connections.
The electrical connection may only be conducted by
•
qualifi ed personnel.
Only perform work on the electrical connection if it
•
has been disconnected from the power supply.
Observe the charge status of the battery pack.
•
Note the technical data for the device.
•
Take care to ensure correct, securely affi xed
•
connections.
ATTENTION
Exchanging components of the ExitSafe with
third party components may damage the compo-
nents or other connected systems.
Exchange components between diff erent systems
•
only after consultation with the manufacturer or your
supplier.
When replacing a component, check whether the
•
type description of the new component matches the
one being replaced.
3
System description
3.1
System design
ExitSafe consists of two main components:
• Control module (ExitSafe-S)
• Battery pack (ExitSafe-A)
Figure 1 is a diagram of the ExitSafe connection.
8 | EN
elero GmbH
Advertisement
Table of Contents
