Signalling - Nice Elero ExitSafe 28 388.0001 Manual

5.3

Signalling

The ExitSafe control module emits the following audible
warnings:
Warning signal
1 x long
(approx. 1 s).
The signal sounds
with every actuation
2 x short
(within 1 s).
The signal sounds
once and with every
actuation.
Table 5: Warning signals
DIP switch 2 can be used to set the warning signal for
the replacement of the battery pack. The warning signal
for a low charge level cannot be disabled.
DIP switch 2 OFF
The signal for replacing the battery pack sounds.
DIP switch 2 ON
The warning signal for replacing the battery pack has been
disabled. An acoustic signal is only emitted in the event of a
low charge level of the battery pack.
22 | EN
Meaning and measures
The battery pack must be replaced.
Two years of operation or 500 charging
cycles of the battery pack have been
reached.
• Change the battery pack.
Low charge level. The charge status
of the battery pack required for
reliable functionality has not been
reached.
• Avoid further actuation of the drive.
• If necessary, restore the mains
supply.
elero GmbH