Table of Contents
Advertisement
3.4
Electrical connection
WARNING
Risk of injury, damage to the ExitSafe and dama-
ge to the area surrounding the ExitSafe due to
improper electrical connections.
The electrical connection may only be conducted by
•
qualifi ed personnel.
Only perform work on the electrical connection if it
•
has been disconnected from the power supply.
• When connecting the motor terminal, ensure correct
assignment to the sense of rotation of the drive.
When the battery charge level is low and automatic
retraction of the blind is activated (UP direction of
travel, DIP switch 3, see section 5.4), a switching
command is issued to retract the blind.
Observe the charge status of the battery pack.
•
Note the technical data for the device.
•
Do not extend the original connection cable of the
•
roller shutter drive.
Take care to ensure the connections are correct and
•
secure.
elero GmbH
EN | 11
Advertisement
Table of Contents
