Powering Off The Projector - Barco G62 Series Installation Manual

5.2 Powering Off the Projector

How to power Off the projector
1. Press the POWER button (2) on the control panel or the OFF key (5) on the remote control, a message
displays on the screen.
MENU
LENS
FOCUS
Image 5–4
2. Press the POWER button or OFF key again to confirm, otherwise the message disappears after 5
seconds and the projector remains on.
CAUTION: Don't turn on the projector immediately after entering Standby mode.
EXIT INPUT
ENTER
Powering On/Off the projector
5
ON OFF
1 2 3
4 5 6
R5914654 /04 G62 series 77