Basic safety notes
2.13.3 Protection against dangerous movements
2.13.4 Notes on particular risks
12
03.00 | KSP3-IM, KSP3-LH-IM | TANDEM Clamping Block | en | 1474090
Unexpected movements
Residual energy in the system may cause serious injuries while
working with the product.
• Switch off the energy supply, ensure that no residual energy
remains and secure against inadvertent reactivation.
• Never rely solely on the response of the monitoring function to
avert danger. Until the installed monitors become effective, it
must be assumed that the drive movement is faulty, with its
action being dependent on the control unit and the current
operating condition of the drive. Perform maintenance work,
modifications, and attachments outside the danger zone
defined by the movement range.
• To avoid accidents and/or material damage, human access to
the movement range of the machine must be restricted. Limit/
prevent accidental access for people in this area due through
technical safety measures. The protective cover and protective
fence must be rigid enough to withstand the maximum possible
movement energy. EMERGENCY STOP switches must be easily
and quickly accessible. Before starting up the machine or
automated system, check that the EMERGENCY STOP system is
working. Prevent operation of the machine if this protective
equipment does not function correctly.
WARNING
Risk of injury in the event of workpiece loss due to failure or
reduction of the compressed air.
Provide pressure maintenance valves
•
Ensure stable compressed air supply
•
WARNING
Risk of injury in the event of workpiece loss due to component
failure on the product as a result of exceeding the technical data.
The product may only be used within the scope of its technical
•
data
WARNING
Risk of injury due to immediate closing of the product with high
spring force in the event of pneumatic pressure failure (AS variant).
Ensure stable compressed air supply
•
Use pressure maintenance valves
•