Technical Data - SCHUNK KSP3-IM 100 Assembly And Operating Manual

Technical data

Installation position
Operating temperature
Noise emission [dB(A)]
Pressure medium
Max. speed of rotation
Size Stroke/
jaw
[mm]
KSP 100
140
160
200
250
315
KSP3-LH 100
140
160
200
250
315
* Clamping force is the arithmetic sum of the individual forces occurring at the chuck
jaws at a distance of "H" (see catalog
** The clamping force increase caused by the spring assembly depends on the stroke
because of the spring tension. The maximum spring force is reached in the "open"
state, the minimum spring force in the "closed" state.
*** Distribution of the clamping position with 100 consecutive clamping operations.
14 03.00 | KSP3-IM, KSP3-LH-IM | TANDEM Clamping Block | en | 1474090
3 Technical data
any
+5 °C to +60 °C
≤ 70
Compressed air, compressed air quality according to
ISO 8573-1:7 4 4
100 RPM
Clampi Additional
ng clamping
force force from
at max. spring
pressu assembly**(A
re* S) [kN]
[kN]
2 18 2.5 – 6.5
3 30 4.5 – 9
3 45 5.5 – 11
4 55 8.5 – 16
5 55 10.5 – 20
6.5 100 16 – 32.5
6 8 1 - 2.5
7 15 2 - 4
8 20 2 - 4.5
10 25 3.5 - 7
15 20 3.5 - 7
18 40 6.5 - 12.5
Standard/AS
operating
pressure [bar]
2 - 9/ 3 - 9
2 - 9/ 3 - 9
2 - 9/ 3 - 9
2 - 9/ 3 - 9
2 - 6/ 3 - 6
2 - 6/ 3 - 6
2 - 9/ 3 - 9
2 - 9/ 3 - 9
2 - 9/ 3 - 9
2 - 9/ 3 - 9
2 - 6/ 3 - 6
2 - 6/ 3 - 6
} 1.1.2 [ /
5]).
Repeat max. Weight
accuracy jaw [kg]
*** height
[mm] [mm]
0.01 60
0.01 60
0.01 60
0.02 100
0.02 150
0.02 200
0.01 150
0.01 120
0.01 200
0.02 200
0.02 500
0.02 500
4
7.5
11
19
32
70
4
7.5
11
19
32
70