Disposal; Fundamental Dangers; Protection During Handling And Assembly; Protection During Commissioning And Operation - SCHUNK KSP3-IM 100 Assembly And Operating Manual

2.12 Disposal

Handling of disposal
The incorrect handling of disposal may impair the product's safety
and cause serious injuries as well as considerable material and
environmental harm.
• Follow local regulations on dispatching product components for
recycling or proper disposal.

2.13 Fundamental dangers

General
• Observe safety distances.
• Never deactivate safety installations.
• Before commissioning the product, take suitable protective
measures to secure the danger zone.
• Disconnect power sources before installation, modification,
maintenance, or calibration. Ensure that no residual energy
remains in the system.
• Do not reach into the open mechanism or movement area of
the product during operation.

2.13.1 Protection during handling and assembly

Incorrect handling and assembly
Incorrect handling and assembly may impair the product's safety
and cause serious injuries and considerable material damage.
• Have all work carried out by appropriately qualified personnel.
• For all work, secure the product against accidental operation.
• Observe the relevant accident prevention rules.
• Use suitable assembly and transport equipment and take
precautions to prevent jamming and crushing.
Incorrect lifting of loads
Falling loads may cause serious injuries and even death.
• Stand clear of suspended loads and do not step into their
swiveling range.
• Never move loads without supervision.
• Do not leave suspended loads unattended.

2.13.2 Protection during commissioning and operation

Falling or violently ejected components
Falling and violently ejected components can cause serious injuries
and even death.
• Take appropriate protective measures to secure the danger
zone.
• Never step into the danger zone during operation.
03.00 | KSP3-IM, KSP3-LH-IM | TANDEM Clamping Block | en | 1474090
Basic safety notes
11