Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro B2SD2-8C-TF User Manual

Super B2SD2(1)-8C/12C/16C-TF MicroBlade Module User's Manual

2.2 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver (1)

Tools Needed

Location of Mounting Holes

Note: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws (8)
P2-LEDBMC
LEDM2
P1-LEDBMC
AST
LEDM1
2500
AST
2500
P2-JPT1
P2-JVRM1
TPM/PORT80
P1-JTPM1
P2-JTPM1
P1-JVRM1
TPM/PORT80
P1-JPT1
P1-JPT1:TPM
1-2:ENABLE 1-2:ENABLE
2-3:DISABLE 2-3:DISABLE
P1-JWD1 P2-JWD1
WATCH DOG WATCH DOG
1-2:RST 1-2:RST
P1_JBT1
2-3:NMI 2-3:NMI
CMOS CLEAR
BAR CODE
P2-JPT1:TPM
1-2:ENABLE
2-3:DISABLE
CPU1
IPMI CODE
MAC CODE
P2-JPME2
1-2:NORMAL
2-3:ME MANUFACTURING MODE
P2-JPME2
CPU2
IPMI CODE
MAC CODE
P2-BT1
SUPERDOM
P2-SATA2
SATA DOM POWER
P2-JSD1
P1-BT1
J27
SUPERDOM
P1-SATA2
P2_JBT1
SATA DOM POWER
P1-JSD1
J3
J2
P1 M.2-P PCI-E 3.0X4 P2 M.2-P PCI-E 3.0X4
22
Standoffs (8)
Only if Needed