Supermicro B2SD2-8C-TF User Manual page 70

Super B2SD2(1)-8C/12C/16C-TF MicroBlade Module User's Manual
Trusted Computing

The B2SD2(1)-8C/12C/16C-TF supports TPM 1.2 and 2.0. The following Trusted Platform
Module (TPM) information will display if a TPM 2.0 module is detected:
TPM20 Device Found
Vendor:
Firmware Version:
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled, onboard
security devices will be enabled for TPM support to enhance data integrity and network
security. Reboot the system for a change on this setting to take effect. The options are Disable
and Enable.
The following TPM information will be displayed:
•
Active PCR banks
•
Available PCR banks
*If the feature "Security Device Support" is enabled, the following features are available
for configuration:
SHA256 PCR Bank
Use this feature to disable or enable the SHA256 Platform Configuration Register (PCR) bank
for the installed TPM device. The options are Disabled and Enabled.
Pending Operation
Use this feature to schedule a TPM-related operation to be performed by a security device
for system data integrity. Your system will reboot to carry out a pending TPM operation. The
options are None and TPM Clear.
Platform Hierarchy
Use this feature to disable or enable platform hierarchy for platform protection. The options
are Disabled and Enabled.
Storage Hierarchy
Use this feature to disable or enable storage hierarchy for cryptographic protection. The
options are Disabled and Enabled.
70