Dimm Installation; Dimm Removal - Supermicro B2SD2-8C-TF User Manual

Super B2SD2(1)-8C/12C/16C-TF MicroBlade Module User's Manual

DIMM Installation

1. Insert the desired number of DIMMs into
the memory slots For best performance,
please use the memory modules of the
same type and speed.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press both ends of the module straight
down into the slot until the module snaps
into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
P2-LEDBMC
LEDM2
P2-JPT1
P2-JVRM1
Release Tabs
Press both notches
straight down into
the memory slot.
26
P1-LEDBMC
AST LEDM1
2500
AST
2500
TPM/PORT80
P1-JTPM1
P2-JTPM1 P1-JVRM1
TPM/PORT80
P1-JPT1
P1-JPT1:TPM
1-2:ENABLE 1-2:ENABLE
2-3:DISABLE 2-3:DISABLE
P1-JWD1 P2-JWD1
WATCH DOG WATCH DOG
1-2:RST 1-2:RST P1_JBT1
2-3:NMI 2-3:NMI
CMOS CLEAR
BAR CODE
P2-JPT1:TPM
1-2:ENABLE
2-3:DISABLE
CPU1
IPMI CODE
MAC CODE
P2-JPME2
1-2:NORMAL
2-3:ME MANUFACTURING MODE
P2-JPME2
CPU2
IPMI CODE
MAC CODE
P2-BT1
SUPERDOM
P2-SATA2
SATA DOM POWER
P2-JSD1
P1-BT1
J27
SUPERDOM
P1-SATA2
P2_JBT1
SATA DOM POWER
P1-JSD1
J2 J3
P1 M.2-P PCI-E 3.0X4 P2 M.2-P PCI-E 3.0X4
Notches