Table of Contents
Advertisement
Super B2SD2(1)-8C/12C/16C-TF MicroBlade Module User's Manual
VGA Priority
Use this feature to select VGA priority when multiple VGA devices are detected. Select On-
board to give priority to your onboard video device. Select Offboard to give priority to your
graphics card. The options are Onboard and Offboard.
Consistent Device Name Support
Select enabled for the BIOS to consistently name network devices. The options are Disabled
and Enabled.
P2: M.2-P PCI-E 3.0 X4 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
Onboard LAN Option ROM Type
Select Enabled to enable Option ROM support to boot the computer using a network device
specified by the user. The options are Legacy and EFI.
Onboard LAN1 Option ROM
Use this feature to select which firmware function to be loaded for the specified LAN port
used for system boot. The options for Disabled and Legacy.
Onboard LAN2 Option ROM
Use this feature to select which firmware function to be loaded for the specified LAN port
used for system boot. The options for Disabled and Legacy.
Onboard Video Option ROM
Use this feature to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.
Network Stack Configuration
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Enabled and Disabled.
*If the feature above is set to Enabled, the next six features will be available for
configuration:
Ipv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.
Ipv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are Disabled and Enabled.
62
Advertisement
Table of Contents
