Motherboard Features - Supermicro B2SD2-8C-TF User Manual

Table of Contents

Advertisement

Motherboard Features

CPU
Intel® Xeon D-2100 SoC (BGA Package) with a TDP of up to 100W
Memory
Each of the two nodes supports up to 128GB of VLP RDIMM DDR4 memory with speeds of up to 2400MHz (sku dependent)
DIMM Size
Each of the two nodes supports up to 128GB at 1.2V
Expansion Slots
One (1) M.2 M-Key (PCI-E x4)
Network
Intel SoC Integrated 10G Controller
Baseboard Management Controller (BMC)
ASpeed AST2500
Graphics
Graphics controller via ASpeed AST2500
I/O Devices
One (1) SATA DOM
Dual 10GbE/KR to backplane
BIOS
256Mb AMI BIOS® SPI Flash BIOS
Plug and Play (PnP), RTC Wakeup
Power Management
ACPI power management
S4, S5
Power button override mechanism
Power-on mode for AC power recovery
System Health Monitoring
Onboard voltage monitors for CPU cores, +3.3V, +5V, +12V, +3.3V Stby, +5V Stby, Vstb, Vcore, Vmem, PCH temperature,
CPU temperature, system temperature, DIMM temperature and Peripheral temperature
CPU phase switching voltage regulator
CPU/System overheat control
CPU Thermal Trip support
Note: The table above is continued on the next page.
Motherboard Features
One (1) U.2/SATA3 via backplane
IPMI 2.0 supported by ASpeed AST2500 BMC
15
Chapter 1: Introduction

Advertisement

Table of Contents
loading

This manual is also suitable for:

B2sd2-12c-tfB2sd2-16c-tfB2sd1-8c-tf

Table of Contents