Supermicro B2SD2-8C-TF User Manual page 79

 Secure Boot
System Mode
Secure Boot
Select Enable for secure boot support to ensure system security at bootup. The options
are Disabled and Enabled.
Secure Boot Mode
This feature allows you to select the desired secure boot mode for the system. The options
are Standard and Custom.
*If Secure Boot Mode is set to Custom, Key Management features are available for
configuration:
CSM Support
This feature is for manufacturing debugging purposes. The options are Disabled and
Enabled.
Key Management
This submenu allows you to configure the following Key Management settings.
Factory Key Provision
Select Enabled to install the default Secure Boot keys set by the manufacturer. The options
are Disabled and Enabled.
*If the feature above is set to Enabled, all features below are available for configuration:
 Restore Factory Keys
Select Yes to restore all factory keys to the default settings. The options are Yes and No.
 Reset To Setup Mode
Select Yes to delete all Secure Boot key databases and force the system to Setup Mode.
The options are Yes and No.

Export Secure Boot variables
Use this feature to copy the NVRAM contents of the secure boot variables to a file.

Enroll Efi Image
This feature allows the image to run in Secure Boot mode.
Device Guard Ready
79
Chapter 4: BIOS