Table of Contents
Advertisement
Super B2SD2(1)-8C/12C/16C-TF MicroBlade Module User's Manual
Advanced Power Management Configuration
Power Technology
This feature allows you to configure CPU power management settings. The options are
Disable, Energy Efficient, and Custom.
*If the feature above is set to Custom, the following features will be available for
configuration:
Power Performance Tuning
This feature allows you to set whether the operating system or the BIOS controls the
Energy Performance BIAS (EPB). The options are OS Controls EPB and BIOS Controls
EPB.
*If the feature above is set to BIOS Controls EPB, the following features will be
available for configuration:
ENERGY_PERF_BIAS_CFG mode
The Energy Performance BIAS (EPB) feature allows you to configure CPU power and
performance settings. Select Maximum Performance to set the highest performance.
Select Performance to optimize performance over energy efficiency. Select Balanced
Performance to prioritize performance optimization while conserving energy. Select
Balanced Power to prioritize energy conservation while maintaining good performance.
Select Power to optimize energy efficency over performance. The options are Maximum
Performance, Performance, Balanced Performance, Balanced Power, and Power.
CPU P State Control
This feature allows you to configure the following CPU power settings:
Uncore Freq Scaling (UFS)
Use this feature to enable or disable uncore frequency scaling. The options are Enable
and Disable.
SpeedStep (Pstates)
Intel SpeedStep Technology allows the system to automatically adjust processor voltage
and core frequency to reduce power consumption and heat dissipation. The options are
Disable and Enable. This feature must be set to Enable to be able to configure the next
two features.
Config TDP
Use this feature to configure the TDP level. The options are Nominal, Level 1, and Level
2.
52
Advertisement
Table of Contents
