Network Connection; Wired Network Connection; Wireless Network Connection - Flashforge Guider 3 User Manual

2.4.1 Wired Network Connection

1. Plug the network cable into the network cable port on the back of the equipment.
2. Click the [ ] - [Network] on the screen, select the wired network and turn on the
wired network switch. If the [
screen, it indicates that the network is successfully connected.
< Network
Ethernet
IP Address：
No connect
Netmask：
Gateway：
Configure IPV4
DNS Server：
Udhcpc

2.4.2 Wireless Network Connection

Please make sure Wi-Fi is installed before connecting to the wireless network,
otherwise the wireless signal will be affected.
Calibration Home
< Network
Wi-Fi
SSID has been connected
IP: 10.03.03.111
10.33.23.222

2.4 Network Connection

] icon appears at the upper right corner of the
10.33.23.222
255.255.255.0
10.33.23.1
202.101.172.35
Move Network Cloud
1/2
OK
< Network
Ethernet
IP Address：
Connect
Netmask：
Gateway：
Configure IPV4
DNS Server：
Udhcpc
< Network
Wi-Fi
1. Click the [
touch screen, select the wireless
network, and turn on the wireless
network switch.
2. Click to connect to the corresponding
wireless network and the corresponding
prompt will appear on the screen after
successful connection. If the [
appears at the upper right corner of the
screen, it indicates that the network
is successfully connected.
11
10.33.23.222
255.255.255.0
10.33.23.1
202.101.172.35
No connect Wi-Fi
] - [Network] on the
] icon