Table of Contents
Advertisement
SAFETY NOTICE: PLEASE CAREFULLY READ AND STRICTLY FOLLOW
ALL THE SAFETY WARNINGS AND NOTICES BELOW ALL THE TIME.
Note: Every 3D printer has undergone printing tests before leaving the factory.
If there are some filament residues in the extruder of the equipment or some
slight scratches on the build plate, it is normal and will not affect its use.
Please keep the work table of the equipment clean and tidy.
Please ensure that the equipment is away from combustible gases, liquids and dust
when it is in operation. The high temperature generated by equipment operation may
react with combustible gases, liquids, and airborne dust, thus causing fire.
Children and untrained personnel are not allowed to operate the equipment alone.
Be sure to ground the equipment. Do not modify the plug of the equipment. Not
grounded equipment/improperly grounded equipment/modified plug will inevitably
increase the risk of electric leakage.
Do not expose the equipment to damp or hot-sun environment. Humidity will increase
the risk of electric leakage. Exposure to sunlight will accelerate the aging of plastic
parts.
Make sure to only use the power cord provided by Flashforge.
Do not use the equipment during an thunderstorm.
Please shut down the equipment and unplug it if it is not in use for a long time.
Do not touch the extruder, build plate, etc., during printing.
Do not touch the extruder and build plate when finishing printing in order to avoid
high temperature burns or mechanical damage.
Do not wear scarves, masks, gloves, jewelry ornaments or other objects that can
easily get tangled into the equipment when operating it.
Do not operate the equipment while you are tired or under the influence of drugs,
alcohol or medication.
Keep the inside of the equipment clean and tidy. Do not drop metal objects into the
sliding chute at the bottom of the build plate.
Please clean up the filament debris in time. It is recommended to operate this outside
the equipment.
NOTICE
WORK ENVIRONMENT SAFETY
ELECTRICAL SAFETY
PERSONAL SAFETY
CAUTIONS
02
Advertisement
Table of Contents
