PROEL DREAMLIGHT 1200 ECLIPSE WASH User Manual page 35

MAXIMUM NONRESETABLE - The function shows the max temperatures of the
fixture inside (Board Temp., Ambient Temp., Near Lamp Temp.) since the
DreamLight 1200CNE has been fabricated.
MAXIMUM RESETABLE - The function shows the maximum temperatures of the
fixture inside (Board Temp., Ambient Temp., Near Lamp Temp.) since the
respective counter was last reset. In order to reset desired counter to
0, press [ENTER] twice. Measurement points:
BOARD TEMP. - temperature on the main board in the fixture base.
Ambient Temp. - temperature of the air which is sucked to the fixture base. This
temperature can be different from the real ambient temperature due to e.g.
suction of the hot air from the fixture head to the base if the fixture is hanging at
the ceiling. Please note that the ambient temperature should not exceed 40°C.
NEAR LAMP TEMP. - temperature in the lamp chamber.
FANS SPEED - Select this function to read the actual speed of the fans(revolutions
per minute):
FAN1 - The fan cools the lamp peak
FAN 3 - The fan on the rear left side of the head
FAN 5 - The left fan at the CMY module
FAN 6 - The right fan at the CMY module
FAN 7 - The Fan iside the head
FAN 9 - The fan on the front right side of the head
DMX VALUES - Select this function to read DMX values of each channel received by
the fixture.
PRODUCT IDS - Select this function to read the MAC address or fixture code.
SOFTWARE VERSION - Select this function to read the software version of the fixture
modules:
IC1 MB - Main processor on the main board in the fixture base
IC2 MB - Tilt processor on the main board in the fixture base
IC3 MB - Pan procesor on the main board in the fixture base
IC4 MB - EEprom on the main board in the fixture base
IC1 B1 - Shutter/conversion filter 3200K processor on the board 1 in the fixture
head
IC2 B1 - Gobo wheel 1/gobo rotation/colour wheel processor on the board 1 in
the fixture head
IC1 B2 - CMY processor on the board 2 in the fixture head
IC2 B2 - Effect wheel/effect rotation processor on the board 2 in the fixture head
IC1 B3 - Zoom/focus/frost processor on the board 3 in the fixture head
IC2 B3 - Gobo wheel 2/gobo rotation/iris processor on the board 3 in the fixture
head
IC1 DS - Display processor on the display module in the fixture base
IC2 DS - Memory on the display module in the fixture base
34