Rigging The Fixture - PROEL DREAMLIGHT 1200 ECLIPSE WASH User Manual

1. Gently bend out the colour module to release it from the fixative holes and eject
it from the pressing snap.
2. Put the new colour module back under the pressing snap and push it to the 3
fixative notches.

RIGGING THE FIXTURE

DANGER TO LIFE!
Please consider the respective national norms during the installation!
The installation must only be carried out by an authorized dealer!
The installation of the fixture has to be built and constructed in a way that it can
hold 10 times the weight for 1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an
appropriate catch net. This secondary safety attachment must be constructed in a
way that no part of the installation can fall down if the main attachment fails.
When rigging, derigging or servicing the fixture staying in the area below the
installation place, on bridges, under high working places and other endangered
areas is forbidden.
The operator has to make sure that safety-relating and machine-technical
installations are approved by an expert before taking into operation for the first
time and after changes before taking into operation another time.
The operator has to make sure that safety-relating and machine-technical
installations are approved by an expert after every four year in the course of an
acceptance test.
The operator has to make sure that safety-relating and machine-technical
installations are approved by a skilled person once a year.
Allow the fixture to cool for ten minutes before handling.
The projector should be installed outside areas where persons may walk by or be
seated.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including
calculating working load limits, installation material being used, and periodic safety
inspection of all installation material and the projector. If you lack these
qualifications, do not attempt the installation yourself, but instead use a
professional structural rigger. Improper installation can result in bodily injury and
or damage to property.
The fixture has to be installed out of the reach of people.
31