Chapter 1 Applicable Models - Mitsubishi Electric MELSEC iQ-F Series Quick Connection Manual

1
APPLICABLE MODELS
The following models can be used for a series of operations described in this manual.
Programmable controller
FX5U CPU module
*1 For the RCP6S series, the specifications do not allow the MODBUS RTU to read or write the position table information register
(positioning data). Therefore, positioning data cannot be read or written. When using the RCP6S, use a Teaching Pendant or computer
software manufactured by IAI Corporation.
*2 For the ERC3 series with the controller type set to the MEC mode, connection is not available.
1 APPLICABLE MODELS
7
FX5UC CPU module
IAI controller
The model shown in the figure is of the PCON-CB/
CGB/CBP/CGBP type.
■PCON series
C/CA/CB/CFA/CFB/CF/CY/CYB/SE
■ACON series
C/CA/CB/CY/CYB/SE
■SCON series
C/CA/CAL/CB (not including servo press
specifications)
■DCON series
CA/CB/CYB
■RCP6S
*1
RCP6S
■ERC2 series
Controller-integrated ROBO Cylinder
*2
■ERC3 series
Controller-integrated ROBO Cylinder