Epson RC700 Series Maintenance Manual page 53

(8) Connect "CN3".
(9) Connect "Cable2 CN1".
(10) Mount the Top Panel. (Mounting screw ×6)
(11) Connect "Cable2 CN4" to the IMM.
(12) Connect the power plug. Turn ON the Controller and make sure that the Controller
RC700 Series Maintenance Rev.3
Maintenance 7. Option Parts Replacement Procedures
safety door, latch).
RC700 Series Manual 11. EMERGENCY
Use a cross-point screwdriver to fasten the connector (CN3).
Use a cross-point screwdriver to fasten the connector (CN1).
starts properly without any vibration or abnormal noise.
39