Epson RC700 Series Maintenance Manual page 32
Robot controller
Hide thumbs
Also See for RC700 Series:
- Manual (316 pages) ,
- Original instructions manual (228 pages) ,
- Manual (274 pages)
Table of Contents
Advertisement
Maintenance 5. Firmware Update
(6) Make sure that the development PC is connected to the Controller with a USB cable
(7) Check the current firmware version and the new firmware version and click the
(8) The firmware upgrade starts. It takes several minutes to complete.
NOTE
(9) Continuous data file transfer starts.
18
and Click the <Next> button.
<Install> button.
Do not disconnect the USB cable during transfer or turn OFF the Controller or the
development PC.
RC700 Series Maintenance Rev.3
Advertisement
Table of Contents
