Concept2 ETV8960bc User Manual page 102

EN
APPLIANCE INSTALLATION
• Do not lift the appliance by holding it by the handle of the door!
• Defects caused by incorrect installation are not covered by the warranty.
• Only the customer, not the manufacturer, is responsible for the appliance installation.
• The manufacturer bears no responsibility for damage caused to people, animals or objects as a result of
incorrect installation.
• To ensure correct function of the appliance, install it in suitable furniture.
• The unit should be installed in standardised kitchen furniture designed for built-in appliances or in proper-
ly adapted furniture of dimensions according to Fig. 6.
• The appliance may be located either under a kitchen cabinet or in a stand-alone cabinet (Fig. 6).
• The kitchen furniture must be made of heat-resistant material (at least 120 °C). The materials and used
glues must be resistant to the warming of the unit according to the ČSN EN 60335-2-6 standard. Materials
and glues which do not meet the stated standard may deform or come unstuck.
• All the protective covers must be fixed at their positions so that it is not possible to remove them without
using a special tool.
• The rear board of the kitchen unit must be removed to ensure proper circulation of air around the
appliance.
• If a cook top is above the appliance, a gap of at least 50 mm must be between them.
20
596
576
18
18
546
595
20
Fig. 6
102
590
min.
550
50
560
600
min.
550
560
SET 8x60ds + MTV6925bc
389
595
596
595
max.
385
580
min.
570
560
ETV8960bc