Measuring Menu; Overview And Digital Display In The Measuring Menu - Siemens SITRANS DA400 Operating Instructions Manual

In the middle section ②, the digital display shows the following, depending on the selected
menu:
● Measured value or fault symbol, parameter value, timer value (trace)
● Channel number, parameter name, timer name (trace)
In the lower section ③, the digital display shows the following, depending on the selected
menu:
● PAR in parameter menu only
● Value for main alarm or limit value, parameter number, time unit in trace menu.
6.3

Measuring menu

6.3.1

Overview and digital display in the measuring menu

Introduction
The measuring menu is used to:
● Display measured values of the measurement channels.
● Display alarms.
● Acknowledge alarms from the acoustic channels.
Elements of the digital display in the measuring menu
Figure 6-3
➀
②
③
④
SITRANS DA400 for oscillating positive displacement pumps with protection against explosion
Operating Instructions, 10/2007, A5E00841127-01
Digital display, acoustic channel
Measured value
Pre-alarm not received
Pre-alarm received
Main alarm not received
⑤ Main alarm received
⑥ Summation alarm received
⑦ Number and name of the measurement
channel
⑧ Value of the main alarm threshold in
measuring mode
Operation
6.3 Measuring menu
33