JVC RX-DV5RSL Service Manual page 13

Removing the DVD / CD mechanism
holder assembly (mechanism included)
Prior to performing the following procedures, remove
the DVD / CD tray, the DVD / CD servo board and
top cover.
1. Remove the four screws marked D attaching the
DVD / CD mechanism holder assembly on the DVD /
CD unit.
2. Pull out the DVD / CD mechanism holder assembly.
(See Fig. 7, 8)
Top cover
Fig.7
DVD / CD mechanism
holder assembly
D D
D
Fig.8
RX-DV5RSL
DVD / CD
unit
DVD / CD
unit
D
1-13