Advertisement
RX-DV5RSL
Removing each board connected to the
main board
Prior to performing the following procedures, remove
the top cover and rear panel.
1.
Cut off the tie band fixing the harness.
2.
Disconnect the video board from the connector
CN911 CN912 on the main board.
3.
Disconnect the DSP board from the connector
CN612 on the main board,
4.
Disconnect the card wire from the connecter CN614
on the main board.
5.
Disconnect the video select board from the
connector CN411, CN412 on the main board.
CN231
CN241
CN231
CN241
Main
board
1-6
(See Fig.6 to 10)
Amplifier board
CN212
Video select
board
Fig.9
Fig.10
Amplifier board
CN614
CN911
/ CN912
CN612
CN412
Amplifier board
CN231
CN212
CN614
CN911
/ CN912
CN612
CN212
CN412
CN231 CN241
Amplifier
board
Fig.6
DSP board
CN612
CN412
Fig.7
CN911
Video board
/ CN912
CN241
Fig.8
CN201
CN212
CN612
DSP
board
Video select
board
DSP
board
CN612
S-video
board
Advertisement
