Table of Contents
Advertisement
OPTISONIC 1400
3.1 Safety instructions
DANGER!
All work on the electrical connections may only be carried out with the power disconnected. Take
note of the voltage data on the nameplate!
DANGER!
Observe the national regulations for electrical installations!
DANGER!
For devices used in hazardous areas, additional safety notes apply; please refer to the Ex
documentation.
WARNING!
Observe without fail the local occupational health and safety regulations. Any work done on the
electrical components of the measuring device may only be carried out by properly trained
specialists.
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.
3.2 Signal cable (remote versions only)
The flow sensor is connected to the signal converter via one signal cable, with (labelled) inner
coax cables for the connection of one or two acoustic paths.
Figure 3-1: Construction of field version
1 Signal converter
2 Open connection box
3 Tool for releasing connectors
4 Marking on cable
5 Insert cable(s) into terminal compartment
10/2016 - 4005626301 - QS OPTISONIC 1400 R01 en
ELECTRICAL CONNECTIONS
www.krohne.com
3
29
Advertisement
Table of Contents
