Table of Contents
Advertisement
OPTISONIC 1400
2.2.1 Field housing
Figure 2-2: Construction of the field housing
1 Cover for electronics and display
2 Cover for power supply and inputs/outputs terminal compartment
3 Cover for measuring sensor terminal compartment
4 Use cable entry 4 or 5 for measuring sensor signal cable
5 (see 4)
6 Cable entry for power supply
7 Cable entry for inputs and outputs
8 Mounting plate for pipe and wall mounting
INFORMATION!
Each time a housing cover is opened, the thread should be cleaned and greased.
Use only resin-free and acid-free grease.
Ensure that the housing gasket is properly fitted, clean and undamaged.
2.3 Nameplates
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.
2.3.1 Nameplate for the measuring sensor (field version)
Examples for measuring sensor .
1. Ambient temperature
2. Protection class
3. Tag number
4. PED data, Category I / II / III or SEP
5. Calibration data
6. Type designation of the flowmeter and CE sign with number(s) of notified body / bodies
7. Name and address of the manufacturer
10/2016 - 4005626301 - QS OPTISONIC 1400 R01 en
www.krohne.com
INSTALLATION
2
7
Advertisement
Table of Contents
