Repair And Warranty; Future Testing And Limitations On Use; Terms And Conditions For Use Of Telguard Product - Telguard Dual Path Series Installation & Operating Manual

Repair and Warranty

If trouble is experienced with the Telguard Cellular Alarm Communicator please
contact Telguard Technical Support for troubleshooting, repair, and (or) warranty
information. The dealer or end user should not attempt any repair to the Telguard
Cellular Alarm Communicator. Repair of this equipment should only be referred to
qualified technical personnel.
Telguard will repair or replace (our option) inoperative units for up to two years from
date of manufacture. This excludes damage due to lightning or to installer error.
Unauthorized modifications void this warranty. Not responsible for incidental or
consequential damages. Liability is limited to price of unit. This is the exclusive
warranty and no other warranties will be honored, whether expressed or implied.
An RMA must be assigned before returning product. You may obtain an RMA via
phone at 800-229-2326 option 1, or via email at returns.telular@ametek.com.
NOTE: RMA number must be on the outside of box or product will not be accepted.

Future Testing and Limitations on Use

The Telguard TG-7 Dual Path Series communicator is part of an advanced design
alarm communication system. It does not offer guaranteed protection against
burglary and fire. Any alarm communication system is subject to compromise or
failure.
The communicator will not work without power. Electrically powered devices will not
work if the power supply is off for any reason, however briefly.
The cellular radio network and/or the local area network (LAN), needed to transmit
alarm signals from protected premises to a central monitoring station, may be
inoperable or temporarily out of service. Cellular radio networks and LANs are also
subject to compromise by sophisticated methods of attack.
This equipment, like any other electrical device, is subject to component failure.
Although this equipment is designed to be long-lasting, the electrical components
could fail at any time.
Due to these limitations, we recommend that if the automatic self-test feature is not
enabled, other arrangements be made with the user to test the system at least once
every three months. Moreover, arrangements should also be made for on-site
inspection/test by a licensed alarm installer at least once each year.

Terms and Conditions for Use of Telguard Product

These Terms and Conditions are a legal contract between you and Telguard for the
title to and use of the Product. BY RETAINING AND USING THE PRODUCT YOU
AGREE TO THE TERMS AND CONDITIONS INCLUDING WARRANTY DISCLAIMERS,
LIMITATIONS OF LIABILITY AND INDEMNIFICATION PROVISIONS BELOW. IF YOU
DO NOT AGREE TO THE TERMS AND CONDITIONS, DO NOT USE THE PRODUCT AND
IMMEDIATELY RETURN THE UNUSED PRODUCT FOR A COMPLETE REFUND. You
agree to accept sole responsibility for any misuse of the Product by you; and, in
addition, any negligent or illegal act or omission of you or your agents, contractors,
servants, employees, or other users of the Product so long as the Product was
obtained from you, in the use and operation of the Product.
TG-7 Dual Path Series Installation & Operating Guide ii 56052601 Rev B © 2022 Telguard