Telguard TG-7 Series Quick Installation Manual
Hide thumbs
Also See for TG-7 Series:
- Installation & operating manual (42 pages) ,
- Installation and operating manual (35 pages) ,
- Quick installation manual (2 pages)
Subscribe to Our Youtube Channel
Related Manuals for Telguard TG-7 Series
Summary of Contents for Telguard TG-7 Series
- Page 1 Telguard TG-7 Series Quick Installation Guide COMPANY CONFIDENTIAL ® For use by TELGUARD customers only. Distribution to other parties strictly prohibited. June 22, 2012 56044203...
- Page 2 ADIO ETWORK Next, you will be connecting the alarm panel's digital dialer output to Telguard and verifying that alarm signals can be reliably sent through Telguard over cellular to the central station digital receiver. The incoming Telco line is not connected to Telguard during this step. A minimum of two alarm signals must be transmitted.
- Page 3 3, using a butt-set. (See programming guide on reverse). LED 3 will be off when idle, if successful. Next, connect the alarm panel's digital dialer output to Telguard and verify that alarm signals can be reliably sent through Telguard over cellular to the central station digital receiver. A minimum of two alarm signals must be transmitted.
- Page 4 When the Telguard is received from the factory, registered and is powered up for the first time, it is ready for activation, provided the default settings are what you want. The STC LED # 2 will flash to indicate any failure conditions. The Mode LED # 3 will be on and the STC 1 and STC 2 relays will be tripped. The Telguard can be programmed using a line-mans butt- set connected to T &...
Need help?
Do you have a question about the TG-7 Series and is the answer not in the manual?
Questions and answers