Remote Instruction Set - WIKA CPU6000 Operating Instructions Manual

7. Remote instruction set

7. Remote instruction set
This remote instruction set applies for all instruments in the CPU6000 series. The
CPU6000 remote-control commands are given in the list below. All commands must be
terminated with a <CR> (Carriage Return) and a subsequent <LF> (Linefeed).
For a query command (ending with a ?), the "Data" column displays the response from
the CPU6000. All response sequences are terminated with a <CR> and a <LF>.
For all commands without a question mark, the "Data" column displays the required
parameters that must be sent to the CPU6000 after the string in the command column.
Command Response
ID? WIKA,CPU6000-X-HH.
SS,AAA
TE? +1.2345E+01
PD? +1.2345E+01
AD? +1.2345E+01
ED? +1.2345E+01
TD? +1.2345E+01
PM? +1.2345E+01
AM? +1.2345E+01
EM? +1.2345E+01
HU? +1.2345E+01
WIKA operating instructions CalibratorUnit, model CPU6000
Description
ID string, WIKA, CPU6000
X = Model of the box, HH = Hardware version,
SS = Software version, AAA = Serial no.
Temperature in °C, CPU6000-W
Pressure in [bar] abs. from the barometric
sensor with accuracy of 0.05 % of full scale
value, CPU6000-W-W
Start of measuring range in [bar] abs. from the
barometric sensor with accuracy of 0.05 % of full
scale value, CPU6000-W-W
End of measuring range in [bar] abs. from the
barometric sensor with accuracy of 0.05 % of full
scale value, CPU6000-W-W
Temperature from the barometric sensor
with accuracy of 0.05 % of full scale value,
CPU6000-W-W
Pressure in [bar] abs. from the barometric
sensor with accuracy of 0.01 % of reading,
CPU6000-W-M
Start of measuring range in [bar] abs. from the
barometric sensor with accuracy of 0.01 % of
reading, CPU6000-W-M
End of measuring range in [bar] abs. from the
barometric sensor with accuracy of 0.01 % of
reading, CPU6000-W-M
Relative humidity in [% rel.], CPU6000-W
EN
31