Maintenance, Cleaning And Calibration; Maintenance; Cleaning; Recalibration - WIKA CPU6000 Operating Instructions Manual

8. Maintenance, cleaning and calibration

8. Maintenance, cleaning and calibration
8.1

Maintenance

The model CPU6000 CalibratorUnit is maintenance-free.
Repairs must only be carried out by the manufacturer.
8.2

Cleaning

CAUTION!
Before cleaning, correctly disconnect the CalibratorUnit from the
■
pressure supply, switch it off and disconnect it from the mains.
Clean the instrument with a moist cloth.
■
Electrical connections must not come into contact with moisture.
■
Residual media on the test item and/or sensors of the CalibratorUnit
■
can result in a risk to personnel, the environment and equipment.
Take sufficient precautionary measures.
For information on returning the instrument see chapter 10.2 "Return".
8.3

Recalibration

DKD/DAkkS certificate - official certificates:
We recommend that the instrument is regularly recalibrated by the manufacturer, with
time intervals of approx. 12 months. The basic settings will be corrected if necessary.
WIKA operating instructions CalibratorUnit, model CPU6000
EN
35