Unpacking; Deafult Rigging Hardware - K-array Mugello-KH I User Manual

Mugello-KH I
User Guide

Unpacking

Each K-array product is built to the highest standard and
thoroughly inspected before leaving the factory.
Upon arrival, carefully inspect the shipping carton, then examine
and test your new device. If you find any damage, immediately
notify the shipping company.
Powered loudspeakers: KH2 I, KH3 I, KH5 I
1x Active Mugello-KH I line array element with rigging hardware
1x 0,5 m (1,6 ft) power joint cable with powerCON TRUE plugs
1x 0,5 m (1,6 ft) signal joint cable with XRL connectors
KH3 I
KH2 I
Passive loudspeakers KH2P I, KH3P I, KH5P I
1x Passive Mugello-KHP I line array element with rigging hardware
KH3P I
KH2P I
6
AES3
OUT
AES3
IN
1/2
3/4
Rear panel
KH5 I
Signal joint Power joint
CH1/CH2 INPUT CH3/CH4 INPUT
HF: 1+ 1- HF: 1+ 1-
LF: 2+ 2- LF: 2+ 2-
CH1/CH2 PARALLEL OUT CH3/CH4 PARALLEL OUT
LINK LINK
KH5P I Rear panel
KH5P I
KH2P I / KH3P I
Rear panel

Deafult Rigging Hardware

Each Mugello-KH I line array element is equiped with a
dedicated rigging hardware that allows to join multiple
elements in loudspeakers systems to be either suspended or
ground stacked.
The default rigging hardware comprises:
A. 2x side plates with handles and holes for ball lock pins;
B. 8x 6 mm ( 0.23 in) quick release pins with handle;
C. 2x rigging brackets.
LINK
CH2
LINK
CH1
KH2 I / KH2P I
KH3 I / KH3P I
KH5 I / KH5P I
A B C