Thunder-Ks3 I - K-array Mugello-KH I User Manual

Thunder-KS3 I

Technical specifications
Type Active subwoofer
Transducers 21" neodymium magnet woofer
Frequency Response 30 Hz – 150/300 Hz (-6 dB) crossover dependant
1
DSP-controlled,
Crossover
Low Pass @ 150 Hz up to 300 Hz, preset dependant
Max SPL 139 dB peak
2
Coverage Omni
Line Input:
2x XLR-F analog balanced / AES3 input
Line Output:
2x XLR-M Link analog balanced / AES3 output
Speaker Output:
Connectors
2x SpeakON NL4 (Ch1 1+/1- // Ch2 2+/2-)
Mains:
powerCON TRUE1 TOP, 16 A true mains
Networking and Data:
1x RJ45, 4x USB-A
Input gain, routing matrix, delay, full parametric IIR fil-
DSP ters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth),
FIR filters, Onboard preset, Remote monitoring
Ethernet connectivity:
Remote Control
Web APP and K-framework3 software
Amplifier Module 4-channel switching mode, Class D
Output Power 4x 2500 W @ 4 Ω
MAINS Operating Range 100-240V AC, 50-60 Hz with PFC
Power Consumption 600 W @ 8 Ω load, Pink noise, 1/4 rated power
Over Temp. (Power Limiting – Thermal Shutdown), Short
Circuit/Overload Output Protection, Power Limiting,
Protections
Clip Limiter/Permanent Signal Limiter, High Frequency
Protection
Technical specifications
Rear Panel
Handling & Finishes
Material Polyurea coated birch plywood
Colors Black, Custom RAL
IP Rating IP53
Dimensions (WxHxD) 735 x 580 x 700 mm (28.9 x 22.83 x 27.56 in)
Weight 56 kg (123.4 lb)
Extensible with dedicated preset according to the midrange crossover point.
1
Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at
2
1 m.
Mugello-KH I
User Guide
AES3
OUT
LINK
AES3
IN
CH2
1/2
LINK
3/4
CH1
31