Active Array Elements: Ac Main Power Kh2 I, Kh3 I And Kh5 I; Status Led Chart - K-array Mugello-KH I User Manual

7. XLR-F channel 2 balanced line input or channels 3 & 4 AES3
input (user selectable via app or software)
8. XLR-M channel 1 link output
9. XLR-F channel 1 balanced line input
10. Reset button
11. Input signal LED monitor
12. Output signal LED monitor
13. System status LED
14. USB ports
15. RJ45 Ethernet port
The active array elements KH2 I, KH3 I and KH5 I can be driven by
either analog or digital signals, the latter via an AES3 or Dante®
connection.
The AES3 connectivity is available via the XLR-F CH2/AES IN
input connector. By default the XLR-F CH2/AES IN connector is
configured as analog input: use the K-array Connect app or the
K-framework3 software to set the XLR-F CH2/AES IN connector
as AES3 digital input.
The Mugello-KH active array elements are Dante Ready
devices: Dante connectivity can be achieved by purchasing a
Dante licence via the Dante Ready Activator included in Dante
Controller version 4.5.0.9 or later.

Status LED chart

Color Mode
orange solid
green solid
red solid
blue solid
any
blinking
color
Description
Booting: DSP software loading
Operating: high temperature warning
System ready
Amplifier module error
Booting: Firmware loading
Operating: system identification
Fault detected
Active Array Elements: AC Main Power
KH2 I, KH3 I and KH5 I
All active line array elements within a cluster of Mugello-KH self
powered loudspeakers shall be properly connected to an AC
power distribution system. Mugello-KH active line array units
implement autorange power amplifier suiting AC operating
voltage in the range 100 V - 230 V.
Make sure the operating voltage is
steadly between 100 V and 230 V AC
To operate safely and effectively,
it is extremely important that the entire
system is properly grounded.
Refer to professionals for selecting the proper
wire gauge according to local regulations.
Use power cable with powerCon TRUE connector for
powering the Mugello-KH active array units.
Wiring Europe
L
BROWN - BLACK -
N
BLUE
GREEN/YELLOW
powerCON TRUE plug
N
L
Mugello-KH I
User Guide
USA/Canada
GREY BLACK - RED - BLUE
WHITE- GREY
GREEN
11