Introduction; Unpacking - K-array ninja kj50vb User Manual

Variable Beam High Power Speaker System

1. INTRODUCTION

Congratulations on your purchase of the K-Array KJ50vb Variable Beam, High Power speaker system.
Along with its ultra-slim profile, substantial output capability and smooth frequency response over the full
vocal range, the KJ50vb has the unique capability to switch-select the Horizontal coverage pattern and to
vary the Vertical coverage through DSP control.
The KJ50vb is specifically designed to work with the K-Array KA7-7 four-channel power amplifier. The KA7-7
provides the discrete pre-set DSP control settings for speaker protection, equalization and the vertical
beamwidth and steering capabilities.
The KJ50vb speaker system is capable of operating with other power amplifiers and DSP control systems.
For these applications please contact K-Array technical support at tech@k-array.com.

2. UNPACKING

Each K-array loudspeaker is built to the highest standard and thoroughly inspected before leaving the factory.
Carefully inspect the shipping carton before opening it, and then examine and test your new loudspeaker. If
you find any damage immediately notify the shipping company. Only the consignee may institute a claim for
damages incurred in shipping. It is suggested that you retain the original packaging so that the system can be
repacked at a future date if necessary.
Please note that K-array and its distributors cannot accept any responsibility for damage to any returned
product through the use of non-approved packaging.
p. 5